Skip to main content
Advanced Solutions Group

Australian Standards Hub

These guides introduce height safety, fall protection and access-equipment topics in plain English. They are orientation, not the licensed standards or competent design. Confirm current editions, parts, jurisdiction and project applicability before relying on requirements.

Confirm Current References

Confirm publisher records and the current licensed edition with the competent reviewer. Changes in a standard do not by themselves establish a universal replacement, testing or compliance obligation for every existing system.

Browse the Standards Guides

Fall Protection

AS/NZS 1891.4

Industrial Fall-Arrest Systems — Selection, Use & Maintenance

Orientation to fall-arrest selection, use, inspection and maintenance; current edition and scope need confirmation.

Read guide
Fall Protection

AS 5532:2025

Manufacturing Requirements for Single-Point Anchor Devices

Single-point anchor-device manufacturing performance, test methods, marking and product instructions for harness-based work at height. Product evidence does not establish installation or substrate suitability.

Read guide
Access Equipment

AS 1657

Fixed Platforms, Walkways, Stairways & Ladders

Design and construction requirements for fixed platforms, walkways, stairways, and ladders providing access to industrial buildings and structures.

Read guide
Structural

AS/NZS 1170.2

Structural Design Actions — Wind Actions

Procedures for determining wind speeds and resulting wind actions on structures. Critical for height safety equipment exposed to wind loads.

Read guide
Rope Access

AS/NZS 4488

Industrial Rope Access Systems — Historical References

AS/NZS 4488.1:1997 is withdrawn; AS/NZS 4488.2:1997 is available superseded. See current AS/NZS ISO 22846.1:2020 and AS/NZS ISO 22846.2:2020 publisher references in the guide.

Read guide
Fall Protection

AS/NZS 4994

Temporary Edge Protection

Requirements for temporary edge protection systems used during construction and maintenance to prevent falls from edges.

Read guide
Rope Access

ISO 22846

Personal Equipment for Protection Against Falls — Rope Access

International standard for rope access methods including Part 1 (fundamental principles) and Part 2 (code of practice). Personnel schemes and project compliance are distinct and need scope-specific verification.

Read guide
Structural

AS 5216

Design of Post-Installed and Cast-In Fastenings in Concrete

Design requirements for post-installed and cast-in fastenings in concrete. Essential for anchor point installations in concrete substrates.

Read guide

How These Standards Work Together

Fall-arrest selection and maintenance, anchor product evidence and fixed access structures address different parts of a height safety project. Confirm which references and manufacturer instructions apply to the selected system and planned work.

Rope access planning, wind actions and concrete fastening design may require additional specialist review. Personnel qualifications do not certify the whole system, and a preliminary calculator does not establish structural capacity or safe access.

Applicable legal duties depend on jurisdiction, role, control and task. Obtain competent engineering and qualified legal advice where needed; this hub does not provide compliance approval.

Need help with standards compliance?

ASG provides height safety audits, gap analysis and remediation planning within an agreed scope. Confirm the applicable references, specialist review and documentation for your project.

Speak to a Compliance Expert: 1300 789 474