Skip to main content
Advanced Solutions Group
Edition and parts to confirm

AS 5216

Fastenings in Concrete

Concrete fastening design considerations for height safety installations. Product data and competent structural design are required.

This guide is general orientation, not the licensed standard, legal advice or permission to work. Verify current sources, manufacturer instructions and site conditions with a competent person. Linked tools are preliminary aids, not design or compliance approval.

Orientation only. This summary is not the licensed standard or current legal advice. Confirm the exact edition, parts and applicability, obtain competent project-specific review, and follow verified manufacturer instructions. Unverified numerical specifications, penalties and universal inspection rules are not prescribed here.

Scope and substrate assessment

Concrete fastenings can be mechanical, bonded or cast-in. Selection depends on the concrete condition, geometry, reinforcement, product approval and load cases. A product label or volume estimate does not establish installed capacity.

Failure modes and design inputs

A structural reviewer considers steel failure, pull-out, concrete cone or edge failure, splitting and group effects where relevant. Share concrete records, cracks, edge distances, reinforcement information and proposed anchor layout; investigation may be needed if records are missing.

Installation evidence

Hole preparation, cleaning, adhesive mixing, temperature, moisture, embedment and curing depend on the selected product instructions. Do not use a generic cure time or concrete strength from this guide. Record the actual product, batch, installation conditions and checks.

Height safety handoff

Provide intended users, fall-arrest or rope-access load cases, static-line forces and exposure conditions for competent design. Agree structural review, waterproofing, inspection and any testing method. An adhesive-volume calculator estimates material only, not fastening capacity.