Skip to main content
Advanced Solutions Group

This guide is general orientation, not the licensed standard, legal advice or permission to work. Verify current sources, manufacturer instructions and site conditions with a competent person. Linked tools are preliminary aids, not design or compliance approval.

Anchor Point Selection & Spacing

Project inputs for anchor selection and layout. Manufacturer information and competent design determine suitability, spacing and load requirements.

Orientation only. This summary is not the licensed standard or current legal advice. Confirm the exact edition, parts and applicability, obtain competent project-specific review, and follow verified manufacturer instructions. Unverified numerical specifications, penalties and universal inspection rules are not prescribed here.

Start with safe work, not an anchor shopping list

Not every roof needs permanent anchors. NSW WHS Regulation sections 78–79 put safer controls first: work on the ground or solid construction, then fall prevention, work positioning and finally fall arrest where higher-order options are not reasonably practicable.

A certified product is not proof of a safe installed system. AS 5532:2025 — manufacturing scope concerns the product; the actual roof, structure, installation and inspection evidence still need review. AS/NZS 1891.4:2025 concerns selection, use and maintenance; public summaries do not provide site approval. Owner duties depend on business activity and control, not ownership alone: see NSW WHS Act sections 19–20 — work and workplace duties.

ASG can help review existing records and access needs, identify gaps, and coordinate competent design and manufacturer advice. That is not automatic certification; do not enter a roof to gather quote information without a separately assessed safe method.

Read NSW roof safety duties and practical next steps

For exact-model requirements, use the SafetyLink roof-anchor manual index and Kattsafe AP135 model page and documents. These are manufacturer resources, not law or an ASG endorsement; check the current instructions for the installed model and do not transfer conditions across variants.

Select the intended application

Start with the task: restraint, fall arrest, work positioning or rope access require different review. Confirm the exact product model and manufacturer documentation. SafetyLink and other ASG supplier products must be selected within the agreed product and installation scope; a brand name is not proof of suitability.

Layout and travel

Map the access point, work zones, edges, skylights, plant and obstacles. Review connected travel and transitions, lanyard or device limits, swing-fall exposure, clearance and rescue. No generic lanyard-based maximum spacing is safe design for every roof.

Substrate and product details

Provide roof profile, structure, material condition and any existing fixing or engineering records. Concrete, metal and membrane construction need different review; product-specific fixing and waterproofing requirements must be confirmed. Missing or concealed records may require investigation.

Design and installation handoff

Agree drawings, design load cases, anchor and fixing selection, installation instructions, asset identification and inspection requirements. Linked adhesive and clearance tools are preliminary estimates only. No product load, proof-test value or warranty is prescribed by this guide.